Galvanized steel strand

the steel wire inside the strand (including the center wire) should be the same diameter, the same strength, the same zinc layer level.

Key words:

Classification:

Hotline:

Galvanized steel strand

Stranding process requirements

1, the steel wire inside the strand (including the center wire) should be the same diameter, the same strength, the same zinc layer level.

2, the diameter and lay length of the steel strand should be uniform. Not loose after cutting.

3, the steel wire inside the strand should be tightly twisted. There should be no crossing, breaking and bending.

4, steel strand should be flat, soft, small residual stress? The shape should not appear after unfolding.

5, 1x3 structural steel strand and overhead ground wire are not allowed to connect, other types of steel strand inside the wire joint should be welded butt, any two joint spacing should not be less than 50m joint should do anti-corrosion treatment.

Prestressed Bellows

Galvanized steel strand

Related Products

Prestressed Steel Strand

Steel strand corrosion resistance is better: bimetal no residue, better corrosion resistance. The horizontal continuous casting process uses high temperature melting, and the residue will overflow the copper surface after calcination, and will not remain in the rigid conductor covered with copper, so there will be no internal corrosion. When flat steel or building foundation is used as the grounding body, the reliability of steel strand grounding device is affected by poor corrosion resistance. Galvanized Angle steel (round steel) as a grounding body, slow steel corrosion. However, because zinc is more active than steel, zinc corrodes faster than steel. Due to the Angle between the galvanized layer and the soil, the corrosion is constantly changing, the stability is poor, the service life is short (generally less than 5 years), and a lot of work needs to be done.

Unbonded Steel Strand

Non-stick steel strand technology has been applied many times in social practical system engineering, especially in the vertical and vertical development directions of three-way prestressed box girder. Good performance. The application of longitudinal reinforcement bars in prestressed simple supported beams makes the small span first free from the tension bench, and then free from the process of hole formation and grouting, thus reducing the construction equipment.

Steel Strand for Concrete

The application of prestressed steel strand in concrete beams is very wide, including Bridges, high-rise buildings and water conservancy projects. Among them, bridge is one of the main fields of application of prestressed steel strand. As an important part of transportation, the quality and safety of Bridges are crucial to social development. The use of prestressed steel strand can greatly improve the bearing capacity and durability of the bridge, and ensure the safe operation of the bridge.

Various Steel Strands

According to the use of classification: prestressed steel strand, (electric) galvanized steel strand and stainless steel strand, which prestressed steel strand coated with anti-corrosion grease or paraffin after the package of HDPE is called unbonded prestressed steel strand, prestressed steel strand is also galvanized or galvanized aluminum alloy steel wire made.

Consulting

Sincerity is special
Seriously is faith.

Information

Home Page
About Us
Products
Engineering case
News

Service Support
OEM/ODM
Why choose us
logistics transportation

7*24 hours

Telephone:( 86) 22-68865566
Mailbox:tenghaikj@126.com
Address: No.6, Dasheng Road, Shuangtang High-end Hardware Industrial Park, Jinghai District, Tianjin

Business License

Leave us a message